設計規範
| Material | GLASS FABRIC |
| Width | 950-1320mm |
| Specification | 1000-7628 fiberglass cloth; 1017 tested wrinkle-free |
| Resin | Epoxy Resin， Epoxy Resin with filler(Phenolic cure) |
| Resin content of prepreg | 40% – 75% is based on RC52% when producing #7628 as the design condition |
| Resin solid content | 56% – 75% |
| Type of solvent used | MEK 33% PMA 33% Methylbenzene 34% mixed solvent designed with 1/4 LEL% (7628 fabric types, glue-containing machine speed 15m/min design |
| Dryer height | Hot kerosene type 10M |
| hot oil system | Operating temperature of heat medium oil tube exchanger: 80~260℃ (up to 280℃) (low temperature control system) |
| Tension range | 3 – 30kgf/full width (control accuracy ± 0.5kgf below 10kgf, control accuracy ± 5% above 10kgf) |
| Control output tension at 5 points | Fabric feeding, first fabric storage machine outlet, EPC lowering, second fabric storage, and winding |
| Mechanical speed | 5- 25m/min |
| Speed | 5m/min-15m/min(7628) |
| Power | AC 3Ø，380 V， 50 Hz |
| Ice water wheel temperature control method | Mold temperature machine independent temperature control |
| Roller surface width | 1500mm |
| Base fabric roll diameter & weight | Max.Φ1000 mm， Min. Φ200mm， Max.1300kg/支 |
| Finished roll diameter & weight | Max.Φ500mm， Max.450kg/piece |
| Machine color | Designated by the owner (provide confirmation from the owner of the color card) |
| Production Environment | Planning the dust-free design of clean room equipment ①Install PC shields on all motor parts ②Install a protective cover on the dust-generating part of the equipment body ③LM guide rail and ball screw are treated with low dust generation ④Use an oil-free chain |
Note: Production speed:
This production speed is based on a production basis weight of 210 g/m2 (7628 cloth), a resin content of 45%, and a solid content of 56%. The production speed varies with process conditions.
關鍵技術
send
Tension control
MD-200 control module
Pre-preg glue
gap control
Adopting screw direct push design without vertical component force
The extrusion wheel gap adjustment speed is 0.5mm/min
dry semi-cured
temperature control
Azbil NX series temperature control module
Winding
MD-200 control module
Sumitomo launched the MD-200 in 2017 as a dedicated driver for controlling roll-to-roll production equipment such as printing machines and coating machines. The MD-200 is equipped with AD/DA converters required for tension control of roll-to-roll production equipment, etc., as well as zero-phase reactors and analog isolators required for noise reduction. It helps to realize easy installation on the control panel and reduce the size of the control panel (the built-in zero-phase reactor range is 2.2 to 11kW).
The main specifications are as follows:
Capacity:
2.2～11kW (200V level)
2.2～55kW (400V level)
Certification:
CE Mark (400V class only)
Safety function torque off SIL2.
Interested in our products? Contact us now!
Taiwan Headquarters
FPD / PCB / CCL / Automation Equipment
Address: No. 68, Shengde North Road, Xihai Village, Dayuan District, Taoyuan City
Tel: +886-3-270-7100
Tel: +886-3-385-2628 ext. 1205, 1211
Fax: +886-3-385-4800
Email: [email protected]
Shanghai Branch
PCB / CCL / Automation Equipment
Address: Room 1402, Jiashang International Plaza, Greenland, Jiading Industrial Zone, Jiading District, Shanghai
Tel: +86-21-5951-6699
Tel: +86-21-5951-2269
Email: [email protected]
Foshan Branch
PCB / CCL / Automation Equipment
Address: No. 1, Lexin Road, Leping Town, Sanshui District, Foshan City, Guangdong Province
Tel: +86-757-8739-3266 ext. 3900
Fax: +86-757-8739-3269
Email: [email protected]
Thailand Branch
PCB / CCL / Automation Equipment
Address: 4Floor , 66 / 51 Unit 011 TH Bangkok Dokmai,
Sukhaphiban 2 Rd,
10250 Thailand
Tel：+66-62-6563599
Email：[email protected]