Buiness Group

Product Area

Product Introduction
PCB/CCL Equipment

CCL Lay up & De-book

CCL 半成品倉ASRS

➡︎Finish➡︎Packing➡︎ASRS

CCL

De-Book
拆解系統

Press System
壓機系統

Lay up
疊合系統

Separate Plate

Separate Plate Scrubber
水洗烘乾系統

CCL 半成品倉ASRS

➡︎Finish➡︎Packing➡︎ASRS

CCL

De-Book
拆解系統

Press System
壓機系統

Lay up
疊合系統

Separate Plate

Separate Plate Scrubber
水洗烘乾系統

product specifications

產品規格

  • It is suitable for copper foil substrates in CCL factories. The upper and lower copper foil, PP and stainless steel mirror plates are automatically laminated on the base plate in sequence and sent to the hot press machine for hot pressing forming.
  • High yield rate, mechanical empty set speed is 8 seconds. Can automatically replace the cushion pad and clean the bottom plate.
  • Applicable copper foil: 1/3, 1/2, 1, 2 oz (thick copper requires special design); PP: 1017, 1027, 106, 1080, 2116, 7628.
  • Color touch screen operation, simple and convenient, abnormal message display instructions.
  • Size switching is preset on the touch screen, making switching easy and fine-tuning.
  • Currently there are two types of equipment, 1UP and 2UP.

CCL 半成品倉ASRS

➡︎Finish➡︎Packing➡︎ASRS

CCL

De-Book
拆解系統

Press System
壓機系統

Lay up
疊合系統

Separate Plate

Separate Plate Scrubber
水洗烘乾系統

Feature description

特色說明

  • The power conveying systems of the brushing, washing and drying sections are independently controlled.
  • Brush grinding uses IE4 super-optimum efficiency motor
  • The brush wheel lifts and lowers using a servo screw, which can be used with thickness measurement to automatically adjust the grinding spacing.
  • Device to stop operation due to lack of water in the grinding and brushing section
  • The pinch feeding rubber wheel adopts a cylinder design, and the pressure and distance can be adjusted
  • Automatic water replenishment, low water level stop
  • The operating status of the equipment can be monitored by sensors
  • Mirror plate count display
  • Drying uses super air knives instead of traditional blowers to save energy
  • Effectively cleans and dries without water droplets, steam, or prints
  • The hot air is filtered, and the equipment transmission and the inner wall of the oven are easy to clean.
上一頁CCL PP cutting
產品介紹PCB/CCL Equipment
下一頁CCL cutting system

Interested in our products? Contact us now!

Taiwan Headquarters

FPD / PCB / CCL / Automation Equipment

Address: No. 68, Shengde North Road, Xihai Village, Dayuan District, Taoyuan City
Tel: +886-3-270-7100
Tel: +886-3-385-2628 ext. 1205, 1211
Fax: +886-3-385-4800
Email: [email protected]

Shanghai Branch

PCB / CCL / Automation Equipment

Address: Room 1402, Jiashang International Plaza, Greenland, Jiading Industrial Zone, Jiading District, Shanghai
Tel: +86-21-5951-6699
Tel: +86-21-5951-2269
Email: [email protected]

Foshan Branch

PCB / CCL / Automation Equipment

Address: No. 1, Lexin Road, Leping Town, Sanshui District, Foshan City, Guangdong Province
Tel: +86-757-8739-3266 ext. 3900
Fax: +86-757-8739-3269
Email: [email protected]

Thailand Branch

PCB / CCL / Automation Equipment

Address: 4Floor , 66 / 51 Unit 011 TH Bangkok Dokmai,
Sukhaphiban 2 Rd,
10250 Thailand
Tel：+66-62-6563599
Email：[email protected]