Buiness Group

Product Area

Product Introduction

Non-standard (customized) automated equipment

Automatic lens assembly machine CCM
Optical module assembly/micro assembly
  • Production stations: 16~24 stations.
  • Production size: Ø3~ Ø24 mm
  • lens size Lens depth: 30mm
  • Optical module: product 2~24 components.
  • Production speed: Actual measurement 4P=20sec/pcs 6P=42sec/pcs or less
  • Machine station: material retrieval/setting/calibration/alignment/assembly/dispensing/curing
  • Machine size: L:1200mm W:1600mm H:1800mm
  • Index structural optical assembly machine, with multiple workstations performing process actions such as material picking, setting, correction, alignment, assembly, dispensing, and curing.
  • Save assembly time by 48%; adopt Index mechanism regardless of lens size (Ø2~24mm) or multiple parts (1~8P or 2~24 parts).
  • It has great expansion flexibility and is developed in conjunction with the material retrieval algorithm, surpassing the performance of traditional structural assembly machines.
  • The line changeover time is short.
  • Suitable for small quantity and diversified production mode.

Optical module assembly/micro assembly

Intelligent production: diversified product micro-module
assembly,Assembly fields: vehicles, mobile phones, fiber optic connectors, electronic components, 3C.
The industry’s latest mobile phone 8P lens → 16 stations are all included in the planning.
Can be planned to 24 workstations.
The production speed is more than twice that of other machines in the industry.

Galvanometer system
  • Provide the best laser process solution
  • The highest value comes from the optimization of the process

Mask machine

Mask production equipment, from feeding, folding, lamination; roll folding, cutting, finished product distribution, and hot pressing to output the finished product, automatic production. Fast production, high quality, high yield.

Sole edging machine

Used for sole contour processing, wheel grinding operation with innovative clamping positioning, can generate the production data with the concept of Industry 4.0

Tolerance is less than ±0.5mm, cycle time is less than 30Sec when the material hardness is above 50°

Double-sided automatic laminating machine
  • FPC:Roll-to-roll cover film and copper foil substrate automatic lamination
  • Biotechnology:automatic lamination of blood glucose test piece bare piece and septum
  • PCB:Automatic lamination of substrate and cover film (roll to sheet)
  • Others: Customized roll-to-sheet or roll-to-roll incoming products automatic lamination

Automatic loading and unloading machine
  • Transfer with SCARA arm
  • Can add film device
  • Space saving L2550 x W1450 x H1900 (mm)
  • Flexible with various desktop inspection equipment
  • Use X-Y table+Delta robot to accomplish high-speed loading and unloading to the inspection machine
  • Applicable to incoming PNL or PCS
  • Modular design for each material number
  • Accomplish different pitch/composition/angle/quantity between trays
  • Use profiling nozzles to suck products
  • Load and unload by tray

Lithium battery equipment

Improve the manual contact with the product, which is easy to cause defects and reliability factors inside the product. Adopt automatic control, fully automatic loading, and carry out various automatic battery assembly processes. Therefore, this system is planned to use modularization, connectivity, universalization, and automation to connect the production schemes of each process in series to achieve the purpose of saving manpower and improving production efficiency and quality

Laser Marking

USUN laser engraving machine adopt MOPA (Master Oscillator Power Amplifier) fiber laser as the processing laser source, which has the characteristics of wide selection range of pulse width, wide frequency range, high single pulse energy and good beam quality. The field mirror can be used for fine marking processes with features as small as 40~50µm. The mechanism design has high strength and can also protect users from process contaminants. It is suitable for precision industry, food industry, and biomedical industry.

Interested in our products? Contact us now!

Taiwan Headquarters

FPD / PCB / CCL / Automation Equipment

Address: No. 68, Shengde North Road, Xihai Village, Dayuan District, Taoyuan City
Tel: +886-3-270-7100
Tel: +886-3-385-2628 ext. 1205, 1211
Fax: +886-3-385-4800
Email: [email protected]

Shanghai Branch

PCB / CCL / Automation Equipment

Address: Room 1402, Jiashang International Plaza, Greenland, Jiading Industrial Zone, Jiading District, Shanghai
Tel: +86-21-5951-6699
Tel: +86-21-5951-2269
Email: [email protected]

Foshan Branch

PCB / CCL / Automation Equipment

Address: No. 1, Lexin Road, Leping Town, Sanshui District, Foshan City, Guangdong Province
Tel: +86-757-8739-3266 ext. 3900
Fax: +86-757-8739-3269
Email: [email protected]

Thailand Branch

PCB / CCL / Automation Equipment

Address: 4Floor , 66 / 51 Unit 011 TH Bangkok Dokmai,
Sukhaphiban 2 Rd,
10250 Thailand
Tel：+66-62-6563599
Email：[email protected]